01 / BOUNDARIESFarm fence systems
Fence panels and grooved posts for farm boundaries, village walls and perimeter enclosures.
WP02 + BC01 / BC04
PRECAST CONCRETE EQUIPMENT
The machines
behind your
next build.
Wall panels. Fence systems. Floor slabs.
Build your production route with equipment selected around the concrete products you want to make.
FORMING EQUIPMENT + MATCHED PRODUCTION SUPPORT
EQUIPMENT IN CONTEXT01 / THE PRODUCTION FLOORISSAC EQUIPMENT CATALOGUE · 2026
WALL PANEL EXTRUDERS✳HOLLOW CORE SLAB MACHINES✳POST & BEAM FORMERS✳COMPLETE LINE SUPPORT
01 / CHOOSE YOUR PRODUCTION ROUTE
Start with the product.
Build the right line.
Match the forming route to the component you want to sell. Then plan concrete supply, reinforcement, handling and curing around it.
01 / BOUNDARIES
02 / HOUSING COMPONENTSWall panel production
Hollow or solid partition panels, with compatible L and T joint components for repeat layouts.
WP01 + WP06 / WP07
03 / FLOORS & ROOFSFloor slab production
Extrusion, moulding and slipforming routes for engineered floor and roof sections.
FS01 / FS02 / FS03 + BC03
02 / THE EQUIPMENT COLLECTION
Built around
your production.
Browse 30 catalogue references. Open a detail to see applications, reference specifications and selection notes.
View the complete catalogue ↗Loading equipment...
No matching equipment. Try a different name, reference or category.
Catalogue codes identify equipment references, not new machine models. Values describe reference builds. Final tooling, output, electricity and scope are agreed in a technical offer. Images illustrate equipment or finished products; the supplied build may differ.
03 / THINK BEYOND THE FORMER
One machine.
A whole production
ecosystem.
Usable output depends on the complete factory. Plan casting beds, concrete supply, curing, bed turnover and handling together.
Plan your equipment line ↗Prepare & mix
Batching, JS mixer, cement silo and screw conveyor. Size supply around actual concrete demand.
MX01Feed & reinforce
Feeding vehicle, pay-off reels, matched grips, calibrated tensioners and bed anchorage.
SP02–SP04 · SP06Form & cure
Select the panel, post, beam or slab section. Define casting beds, protected curing and release strength.
WP01–WP07 · BC01–BC05 · FS01–FS03Cut, handle & verify
Match cutters, carts, clamps and installation equipment. Plan concrete testing and dimensional checks.
SP01 · SP05 · SP0704 / REFERENCE CONFIGURATIONS
A useful starting point.
A confirmed offer comes next.
Keep local configurations separate from the wider equipment series. These examples are recorded in the catalogue for initial selection.
LOCAL WALL PANEL LINECATALOGUE P.20
90 × 600 / 150 × 600 mm
| Parameter | 90 × 600 mm | 150 × 600 mm |
|---|---|---|
| Main motor | 5.5 kW | Unit to confirm |
| Vibrator | 3 kW | 3 kW |
| Forming speed | 100 m/h | 80 m/h |
| Machine L×W×H | 2.5 × 1.0 × 1.3 m | 2.5 × 1.0 × 1.3 m |
| Weight | 1.05 t | 1.35 t |
The source contains an inconsistent main motor unit for the 150 mm build; supplier confirmation is required. Forming speed is not saleable daily output.
LOCAL FLOOR SLAB LINECATALOGUE P.21
90 × 600 mm slab build
| Reference | Previous local offer |
|---|---|
| Main motor / vibrator | Approx. 5.5 / 1.5 kW |
| Forming speed | 1.3–1.5 m/min |
| Cores | 7 round cores, Ø58 mm |
| Weight | Approx. 950 kg |
Confirm mixer, cutter and handling equipment in a new offer. Specify design loads, reinforcement, release strength and lifting points.
CUSTOM ENGINEERING ENQUIRY
Planning livestock
slatted floors?
Open livestock slats differ from closed hollow-core slabs. Share the animal type, slab drawing, slot dimensions, span, design load and target daily output for a custom mould enquiry.
Discuss a custom mould ↗Custom enquiry route. Model, feasibility, capacity and supply scope require confirmation.
BEFORE YOU ORDER
Practical answers.
Clear next steps.
What do you need to recommend equipment?
Share the finished product drawing, section and length, saleable output per shift, shift hours, country and port, concrete materials, electricity and factory layout.
Does forming speed equal daily output?
No. Forming speed excludes curing, cutting and handling. Bed length, number of lanes, bed turnover, curing and labour affect saleable output.
Can a wall panel extruder produce structural floors?
A wall panel extruder should not be assumed to produce structural floor slabs. Establish loads, span, reinforcement and the engineered section before choosing equipment.
What is included in a complete production line?
The agreed equipment list defines the scope. Request a layout, utility requirements, manuals, commissioning, training and spares schedule. Agree responsibility for civil works, beds and anchorage.
How do I get prices and delivery terms?
Request a current technical and commercial offer for your configuration. Pricing, packing, lead time, warranty and installation support are confirmed in that offer.
05 / YOUR PROJECT STARTS HERE
What do you
want to make?
Start with the concrete component. We'll discuss the equipment and production line around your requirements.
+86 173 29438411 ↗CHAT WITH ISSAC ON WHATSAPPISSAC INDUSTRY CO LTDNo. 2804, Beihuan Road, Jinshui District,
Zhengzhou, ChinaDownload the 2026 equipment catalogue (PDF) ↓